WIND SPEED SENSOR
The RK100-02 Wind Speed Sensor uses a sensitive 3-cup anemometer designed to measure wind speed and wind run. The cups are made of carbon fiber material, with high intensity and low starting threshold. The signal processing units are built in the housing shell. It can be widely used in meteorology, marine, environmental monitoring, airport, harbor, laboratory, industrial and agricultural areas.
SPECIFICATION
1. Supply Voltage 5V,12V-24V
2. Range. 0-45m/s
3. Load Capacity > 1kΩ
4. Starting Threshold< 0.5m/s
5. Limit wind speed 50m/s
6. Ingress ProtectionIP65
7. Operating Temperature-40°C~ +50°C
8. Cable Grade Nominal voltage:300V ,Temperature grade:80°C
9. Weight(unpacked)170g
10. Dimension Cup rotor:ø179mm,Height:160mm
11. Main material - Carbon fiber
12. Storage Condition 10°C-50°C@20%-90%RH
13. Accuracy ±(0.3+0.03V)m/s; (V is the current wind speed)
RS485/RS232 CONVERTOR
Thingstels RS485/RS232 convertor Features 2 serial inputs and 1 alarminput & relay output, UC1152 supports standard LoRaWAN class Cprotocol, which is perfectly used as a remote data logger or a remoteI/O controller. Coupled with a LoRaWAN gateway, UC1152 enables usersto fastly build up a LoRa-Based IoT solution for data collection, remotecontrol and monitoring of field devices.
SPECIFICATION
1. Connector : 1 × 50 ΩSMA(Center PIN: SMA Female)
2. Protocol : LoRaWAN 1.0/1.0.2 Class C
3. Port : 1 × Micro USB Port
4. Connector : Terminal block
5. Digital Inputs : 2 x Opto-isolated DigitalInputsDC Voltage (3-24V)
6. Digital Outputs : 2 x SPDT Relay ContactRating:3 Amp DC (Max: 30 V) or 3 AmpAC (Max: 250 V)
7. Power Supply Input Voltage : 5-24V DC(Standard adapter: DC 12V/0.5A)
8. Dimensions : 79 x 60 x 24 mm (3.11 x 2.36 x0.94 in)
9. Mounting : Desktop or Wall Mounting
10. Reset Button : 1 × RESET (Inside TheDevice)
11. LED Indicators : 1 × System, 1 × ACT
12. Built-in : Watchdog
13. Operating Temperature : -40°C to 70°C
